website

1046: 48-ounce Industrial Cleaner/Degreaser Handheld Pump Sprayer

#1046

  • $39.99
    Unit price per 
  • Save $12
Shipping calculated at checkout.

PrintWarning: Cancer and Reproductive Harm.

Print Advertencia: Cáncer y Daños Reproductivos.

PrintAvertissement: Cancer et Dommages Reproductifs.

Print www.P65Warnings.ca.gov.


Chapin's 1046 industrial sprayer is designed for use with most cleaners and degreasers. This sprayer has chemical-resistant seals and gaskets to handle most common cleaning agents.
  • 48-ounce translucent poly bottle
  • Compatible with most industrial chemicals, suitable for homeowners too (check chemical manufacturers instructions)
  • Adjustable poly and brass cone nozzles included to spray a fine mist or coarse stream with a simple twist
  • In-tank anti-clog filter for continuous spraying
  • Ergonomic handle to reduce hand and wrist fatigue

    Applications: Cleaning, Degreasing

    Documentation & Support

    Chapin Warranty Information
    • Before use: Remove nozzle from inside of tank.
    • Periodically apply a few drops of oil down pump rod hole.
    • Do not use with solvents and petroleum distillate's that affect plastics.
    • This sprayer is not recommended for use with acid or flammable liquids.

      WARNING: Always wear eye protection. Do not spray during windy conditions. Clean sprayer thoroughly after each use. Before using read and understand chemical manufacturer’s instructions and warnings as well as those above. FAILURE TO HEED ALL SAFETY WARNINGS AND INSTRUCTIONS COULD RESULT IN SERIOUS BODILY INJURY OR PROPERTY DAMAGE.

      Technical Specs

      Model Number

      1046

      Tank Size (ounces)

      48

      Tank Material

      poly

      Pump Type

      piston

      Seal Material

      chemical-resistant

      Nozzle(s)

      adjustable brass

      Filters

      in-tank

      Handle

      poly

      Spray/Flow Rate (GPM)

      0.4 - 0.5

      Operating Pressure (PSI)

      40 - 60

      Item Dimensions (L x W x H – inches)

      4.75 x 7 x 11.75

      Item Weight (pounds)

      0.78

      Warranty

      1-year limited

      *Spray distance is dependent on many factors such as adjusted nozzle orifice size, tank pressure, wind interference and angle of inclination. Spray distances may vary based on user's specific application.

      Due to our ongoing product improvement process, product specifications may change without notice.

      Chapin's 1046 industrial sprayer is designed for use with most cleaners and degreasers. This sprayer has chemical-resistant seals and gaskets to handle most common cleaning agents.
      • 48-ounce translucent poly bottle
      • Compatible with most industrial chemicals, suitable for homeowners too (check chemical manufacturers instructions)
      • Adjustable poly and brass cone nozzles included to spray a fine mist or coarse stream with a simple twist
      • In-tank anti-clog filter for continuous spraying
      • Ergonomic handle to reduce hand and wrist fatigue

        Applications: Cleaning, Degreasing

        Documentation & Support

        Chapin Warranty Information
        • Before use: Remove nozzle from inside of tank.
        • Periodically apply a few drops of oil down pump rod hole.
        • Do not use with solvents and petroleum distillate's that affect plastics.
        • This sprayer is not recommended for use with acid or flammable liquids.

          WARNING: Always wear eye protection. Do not spray during windy conditions. Clean sprayer thoroughly after each use. Before using read and understand chemical manufacturer’s instructions and warnings as well as those above. FAILURE TO HEED ALL SAFETY WARNINGS AND INSTRUCTIONS COULD RESULT IN SERIOUS BODILY INJURY OR PROPERTY DAMAGE.

          Technical Specs

          Model Number

          1046

          Tank Size (ounces)

          48

          Tank Material

          poly

          Pump Type

          piston

          Seal Material

          chemical-resistant

          Nozzle(s)

          adjustable brass

          Filters

          in-tank

          Handle

          poly

          Spray/Flow Rate (GPM)

          0.4 - 0.5

          Operating Pressure (PSI)

          40 - 60

          Item Dimensions (L x W x H – inches)

          4.75 x 7 x 11.75

          Item Weight (pounds)

          0.78

          Warranty

          1-year limited

          *Spray distance is dependent on many factors such as adjusted nozzle orifice size, tank pressure, wind interference and angle of inclination. Spray distances may vary based on user's specific application.

          Due to our ongoing product improvement process, product specifications may change without notice.