Chapin 82108B: 100-pound Professional & Residential Salt and Ice Melt Broadcast Spreader
#82108B
We currently have 1211 in stock.
Warning: Cancer and Reproductive Harm.
Advertencia: Cáncer y Daños Reproductivos.
Avertissement: Cancer et Dommages Reproductifs.
Chapin’s 82108B 100-pound professional salt spreader features functionality needed for reliable, efficient performance. It’s designed and built for professionals and is simple enough for a homeowner to use as a salt spreader for their driveway. The large, 2-piece hopper design with a T-handle with grips, is supported on a stainless steel frame. Solid steel linkage for full gate control and a spiked auger help move salt and tear through clumps. The 14-inch pneumatic tires cover just about any terrain and the baffle system controls the spread pattern. Protective rain/snow cover included. This unit is not recommended for use with rock salt, sand, or sand mixes, lime, pelletized lime and lime mixes. Made in the USA with global materials and backed by Chapin’s limited lifetime warranty.
- 100-pound capacity hopper: blue, weather-resistant poly holds up to 100 pounds of material and is supported on stainless steel frame; enclosed gears are protected from the weather
- Made in the USA with global materials: designed and produced in the USA with US-based customer service and technical support, located at Chapin’s home base in Batavia, NY; backed by Chapin’s limited lifetime warranty
- T-shaped with rubber grips: large handle to easily push the spreader through snow and over ice; comfortable to grip with gloves; some assembly required
- Rear and side baffles: target where the ice melt should go by setting the side baffles; better direction and less wasted product; the fixed rear baffle keeps particles from spraying backwards towards you while spreading
- Spiked auger: breaks up clumps so your preferred salt or ice melt can easily flows through the gate opening
- Gate lever: change the gate opening based on the particulates; recommended for use with salt, halite, potassium chloride, magnesium chloride and calcium chloride (small and pelletized particulates)
- Tires and accessories: 14-inch pneumatic, wide-tread tires move over uneven ground; rain/snow cover included to protect particulates while spreading
- Note: not recommended for use with rock salt products, sand or sand mixes, pelletized lime, lime or lime powders
Applications: pretreat and de-ice solutions
Documents & Support
Chapin 82108B Professional Salt & Ice Melt Spreader Product Manual |
Chapin Warranty Information |
Salt Spreader Technical Support Videos |
IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING. |
Questions on chemical compatibility? Contact Tech Support! (Online Form) |
Replacement Parts
Ref. # | Qty | Part No. | Description |
1 | 1 | 6-9032 | Hopper base assembly |
2 | 1 | 6-9068 | Gearbox assembly |
3 | 1 | 6-9009 | Driveshaft with 2 bearings |
4 | 1 | 6-9038 | Gate control assembly |
5 | 1 | 6-9014 | Impeller |
6 |
1 | 6-9015 | Wheels with hardware |
7 |
1 | 6-9016 | Handle grips |
8 |
1 | 6-9093 | Hardware blister kit |
9 |
1 | 6-9001 | Grate |
10 |
1 | 6-9025 | Salt baffles |
11 |
1 | 6-9050 | Rear baffles |
12 |
1 | 6-9000 | Rain cover |
13 | 1 | 6-9067 | Auger |
Not all parts are available for purchase on our website. Please call Customer Service to order parts if you don't see your part listed. 1-800-444-3140
Technical Specs
Model Number |
82108B |
Hopper Material |
poly |
Hopper Capacity (pounds) |
100 |
Frame Material |
stainless steel |
Handle Type |
t-handle with rubber grips |
Handle Material |
stainless steel |
Baffle |
fixed rear and adjustable sides |
Gear Box |
enclosed |
Gear Material |
metal-alloy |
Impeller |
designed for even spread pattern |
Axel Material |
metal-alloy |
Grate |
yes |
Gate Control |
adjustable lever |
Linkage |
stainless steel |
Agitator Type |
spiked auger |
Wheel Size (inches) |
14 |
Wheel Type |
pneumatic |
Rain Cover |
yes |
Item Dimensions (L x W x H – inches) |
38 x 24 x 36 |
Item Weight (pounds) |
38.5 |
Warranty |
limited lifetime |
Due to our ongoing product improvement process, product specifications may change without notice.
Chapin’s 82108B 100-pound professional salt spreader features functionality needed for reliable, efficient performance. It’s designed and built for professionals and is simple enough for a homeowner to use as a salt spreader for their driveway. The large, 2-piece hopper design with a T-handle with grips, is supported on a stainless steel frame. Solid steel linkage for full gate control and a spiked auger help move salt and tear through clumps. The 14-inch pneumatic tires cover just about any terrain and the baffle system controls the spread pattern. Protective rain/snow cover included. This unit is not recommended for use with rock salt, sand, or sand mixes, lime, pelletized lime and lime mixes. Made in the USA with global materials and backed by Chapin’s limited lifetime warranty.
- 100-pound capacity hopper: blue, weather-resistant poly holds up to 100 pounds of material and is supported on stainless steel frame; enclosed gears are protected from the weather
- Made in the USA with global materials: designed and produced in the USA with US-based customer service and technical support, located at Chapin’s home base in Batavia, NY; backed by Chapin’s limited lifetime warranty
- T-shaped with rubber grips: large handle to easily push the spreader through snow and over ice; comfortable to grip with gloves; some assembly required
- Rear and side baffles: target where the ice melt should go by setting the side baffles; better direction and less wasted product; the fixed rear baffle keeps particles from spraying backwards towards you while spreading
- Spiked auger: breaks up clumps so your preferred salt or ice melt can easily flows through the gate opening
- Gate lever: change the gate opening based on the particulates; recommended for use with salt, halite, potassium chloride, magnesium chloride and calcium chloride (small and pelletized particulates)
- Tires and accessories: 14-inch pneumatic, wide-tread tires move over uneven ground; rain/snow cover included to protect particulates while spreading
- Note: not recommended for use with rock salt products, sand or sand mixes, pelletized lime, lime or lime powders
Applications: pretreat and de-ice solutions
Documents & Support
Chapin 82108B Professional Salt & Ice Melt Spreader Product Manual |
Chapin Warranty Information |
Salt Spreader Technical Support Videos |
IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING. |
Questions on chemical compatibility? Contact Tech Support! (Online Form) |
Replacement Parts
Ref. # | Qty | Part No. | Description |
1 | 1 | 6-9032 | Hopper base assembly |
2 | 1 | 6-9068 | Gearbox assembly |
3 | 1 | 6-9009 | Driveshaft with 2 bearings |
4 | 1 | 6-9038 | Gate control assembly |
5 | 1 | 6-9014 | Impeller |
6 |
1 | 6-9015 | Wheels with hardware |
7 |
1 | 6-9016 | Handle grips |
8 |
1 | 6-9093 | Hardware blister kit |
9 |
1 | 6-9001 | Grate |
10 |
1 | 6-9025 | Salt baffles |
11 |
1 | 6-9050 | Rear baffles |
12 |
1 | 6-9000 | Rain cover |
13 | 1 | 6-9067 | Auger |
Not all parts are available for purchase on our website. Please call Customer Service to order parts if you don't see your part listed. 1-800-444-3140
Technical Specs
Model Number |
82108B |
Hopper Material |
poly |
Hopper Capacity (pounds) |
100 |
Frame Material |
stainless steel |
Handle Type |
t-handle with rubber grips |
Handle Material |
stainless steel |
Baffle |
fixed rear and adjustable sides |
Gear Box |
enclosed |
Gear Material |
metal-alloy |
Impeller |
designed for even spread pattern |
Axel Material |
metal-alloy |
Grate |
yes |
Gate Control |
adjustable lever |
Linkage |
stainless steel |
Agitator Type |
spiked auger |
Wheel Size (inches) |
14 |
Wheel Type |
pneumatic |
Rain Cover |
yes |
Item Dimensions (L x W x H – inches) |
38 x 24 x 36 |
Item Weight (pounds) |
38.5 |
Warranty |
limited lifetime |
Due to our ongoing product improvement process, product specifications may change without notice.