Chapin 82500B: 100-pound Stainless Steel Professional Broadcast Salt Spreader
#82500B
We currently have 131 in stock.
Warning: Cancer and Reproductive Harm.
Advertencia: Cáncer y Daños Reproductivos.
Avertissement: Cancer et Dommages Reproductifs.
Built tough for professionals. Chapin’s 82500B 100-pound stainless steel rock salt spreader is designed for superior performance season-after-season. Load your rock salt into the stainless steel hopper, set the baffles and get to work. The spiked auger minimizes clumping and improves flow and the solid frame with 14-inch pneumatic tires gives you stability and control on icy, uneven surfaces. Use the included snow/rain cover while working in inclement weather conditions. Made in the USA and backed by Chapin’s 5-year limited warranty.
- 100-pound stainless steel hopper: one-piece hopper with rolled edges, no welds; rugged stainless steel frame and hardware; t-handle with rubber grips; enclosed metal gears with grease fitting
- Made in the USA with global materials: designed and produced in the USA with US-based customer service and technical support; backed by Chapin’s 5-year limited warranty
- Gate control: solid linkage for full gate control opens and closes the gate in incremental steps
- Spiked auger: rugged, spiked auger breaks up clumps so your preferred salt or ice melt can easily flows through the gate opening
- Baffles: target where the ice melt should go by setting the attached baffles; better direction and less wasted product
- Recommended for large particulates, inconsistent in size: rock salt and ice melt Recommended for small and pelletized particulates: salt, ice melt, halite, potassium chloride, magnesium chloride and calcium chloride
- Tires and accessories: 14-inch pneumatic, wide-tread tires move over uneven ground; rain/snow cover included to protect particulates while spreading
- Note: not recommended for use with sand or sand mixes, lime, pelletized lime, and lime mixes
Applications: Rock Salt, Ice Melt
Documents & Support
Chapin 82500B Professional Stainless Steel Salt Spreader Product Manual |
Chapin Warranty Information |
Salt Spreader Technical Support Videos |
IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING. |
Questions on chemical compatibility? Contact Tech Support! (Online Form) |
NOTE: Regardless of the material used, spreaders should be cleaned out after every use to ensure a lifetime of service. Some materials are much more aggressive oxidizers than others. Magnesium chloride will rust any stainless or mild steel materials in wet conditions in a matter of days. Calcium chloride is less aggressive but will rust stainless or mild steel in a matter of weeks. The ice melting chlorides are normally used when temperatures drop below 20 degrees Fahrenheit or in ‘pet safe’ or ‘environmentally friendly’ ice melt products. Regular rock salt or calcium will take a couple of months to cause rust. This is why it is important to wash out after each and every use.
Replacement Parts
Ref. # | Qty | Part No. | Description |
1 | 1 | 6-9068 | Gearbox assembly |
2 | 1 | 6-9009 | Driveshaft with 2 bearings |
3 | 1 | 6-9038 | Gate control assembly |
4 | 1 | 6-9058 | Impeller |
5 | 1 | 6-9015 | Wheels with hardware |
6 | 1 | 6-9025 | Salt baffles |
7 | 1 | 6-9050 | Rear baffle |
8 | 1 | 6-9067 | Auger |
9 |
1 | 6-9093 | Hardware blister kit |
10 |
1 | 6-9053 | Grate |
11 | 1 | 6-9054 | Rain cover |
Not all parts are available for purchase on our website. Please call Customer Service to order parts if you don't see your part listed. 1-800-444-3140
Technical Specs
Model Number |
82500B |
Hopper Material |
stainless steel |
Hopper Capacity (pounds) |
100 |
Frame Material |
stainless |
Handle Type |
t-handle with rubber grip |
Handle Material |
stainless steel |
Baffle |
fixed rear and adjustable sides |
Gear Box |
enclosed with grease fitting |
Gear Material |
metal-alloy |
Impeller |
designed for even spread pattern |
Axel Material |
metal-alloy |
Grate |
yes |
Gate Control |
adjustable lever |
Linkage |
stainless steel |
Agitator Type |
spiked auger |
Wheel Size (inches) |
14 |
Wheel Type |
pneumatic |
Rain Cover |
yes |
Item Dimensions (L x W x H – inches) |
27.5 x 44.5 x 32 |
Item Weight (pounds) |
52.5 |
Warranty |
5-year limited |
Due to our ongoing product improvement process, product specifications may change without notice.
Built tough for professionals. Chapin’s 82500B 100-pound stainless steel rock salt spreader is designed for superior performance season-after-season. Load your rock salt into the stainless steel hopper, set the baffles and get to work. The spiked auger minimizes clumping and improves flow and the solid frame with 14-inch pneumatic tires gives you stability and control on icy, uneven surfaces. Use the included snow/rain cover while working in inclement weather conditions. Made in the USA and backed by Chapin’s 5-year limited warranty.
- 100-pound stainless steel hopper: one-piece hopper with rolled edges, no welds; rugged stainless steel frame and hardware; t-handle with rubber grips; enclosed metal gears with grease fitting
- Made in the USA with global materials: designed and produced in the USA with US-based customer service and technical support; backed by Chapin’s 5-year limited warranty
- Gate control: solid linkage for full gate control opens and closes the gate in incremental steps
- Spiked auger: rugged, spiked auger breaks up clumps so your preferred salt or ice melt can easily flows through the gate opening
- Baffles: target where the ice melt should go by setting the attached baffles; better direction and less wasted product
- Recommended for large particulates, inconsistent in size: rock salt and ice melt Recommended for small and pelletized particulates: salt, ice melt, halite, potassium chloride, magnesium chloride and calcium chloride
- Tires and accessories: 14-inch pneumatic, wide-tread tires move over uneven ground; rain/snow cover included to protect particulates while spreading
- Note: not recommended for use with sand or sand mixes, lime, pelletized lime, and lime mixes
Applications: Rock Salt, Ice Melt
Documents & Support
Chapin 82500B Professional Stainless Steel Salt Spreader Product Manual |
Chapin Warranty Information |
Salt Spreader Technical Support Videos |
IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING. |
Questions on chemical compatibility? Contact Tech Support! (Online Form) |
NOTE: Regardless of the material used, spreaders should be cleaned out after every use to ensure a lifetime of service. Some materials are much more aggressive oxidizers than others. Magnesium chloride will rust any stainless or mild steel materials in wet conditions in a matter of days. Calcium chloride is less aggressive but will rust stainless or mild steel in a matter of weeks. The ice melting chlorides are normally used when temperatures drop below 20 degrees Fahrenheit or in ‘pet safe’ or ‘environmentally friendly’ ice melt products. Regular rock salt or calcium will take a couple of months to cause rust. This is why it is important to wash out after each and every use.
Replacement Parts
Ref. # | Qty | Part No. | Description |
1 | 1 | 6-9068 | Gearbox assembly |
2 | 1 | 6-9009 | Driveshaft with 2 bearings |
3 | 1 | 6-9038 | Gate control assembly |
4 | 1 | 6-9058 | Impeller |
5 | 1 | 6-9015 | Wheels with hardware |
6 | 1 | 6-9025 | Salt baffles |
7 | 1 | 6-9050 | Rear baffle |
8 | 1 | 6-9067 | Auger |
9 |
1 | 6-9093 | Hardware blister kit |
10 |
1 | 6-9053 | Grate |
11 | 1 | 6-9054 | Rain cover |
Not all parts are available for purchase on our website. Please call Customer Service to order parts if you don't see your part listed. 1-800-444-3140
Technical Specs
Model Number |
82500B |
Hopper Material |
stainless steel |
Hopper Capacity (pounds) |
100 |
Frame Material |
stainless |
Handle Type |
t-handle with rubber grip |
Handle Material |
stainless steel |
Baffle |
fixed rear and adjustable sides |
Gear Box |
enclosed with grease fitting |
Gear Material |
metal-alloy |
Impeller |
designed for even spread pattern |
Axel Material |
metal-alloy |
Grate |
yes |
Gate Control |
adjustable lever |
Linkage |
stainless steel |
Agitator Type |
spiked auger |
Wheel Size (inches) |
14 |
Wheel Type |
pneumatic |
Rain Cover |
yes |
Item Dimensions (L x W x H – inches) |
27.5 x 44.5 x 32 |
Item Weight (pounds) |
52.5 |
Warranty |
5-year limited |
Due to our ongoing product improvement process, product specifications may change without notice.