Chapin 82104B: 80-pound Poly Hopper Professional & Contractor Salt & Ice Melt Broadcast Spreader

#82104B

  • $419.99
    Unit price per 
  • Save $60
Shipping calculated at checkout.

PrintWarning: Cancer and Reproductive Harm.

Print Advertencia: Cáncer y Daños Reproductivos.

PrintAvertissement: Cancer et Dommages Reproductifs.

Print www.P65Warnings.ca.gov.


Chapin’s 82104B professional salt spreader is designed and built as a professional, contractor spreader to spread ice melt and salt along sidewalks and professional buildings and is simple enough for a homeowner to use as a salt spreader for their driveway. Our professional salt spreader includes a spiked auger to tear up clumps of salt or ice melt to not clog while spreading. Its rubber grips on the t-shaped stainless steel handle make it easier to push along uneven surfaces, especially while wearing gloves. The 82104B professional salt spread comes with a fixed rear and adjustable side baffles to control where you’re spreading and an adjustable gate to control the amount you’re spreading. A rain cover and grate is included. This unit is not recommended for use with rock salt, sand, or sand mixes. Made in the USA with global materials and backed by Chapin’s 5-year limited warranty.

  • 80-pound capacity hopper: rust-resistant, blue poly holds up to 80 pounds of material and is supported on stainless steel frame; enclosed gears are protected from the weather
  • Made in the USA with global materials: designed and produced in the USA with US-based customer service and technical support, located at Chapin’s home base in Batavia, NY; backed by Chapin’s 5-year limited warranty
  • T-shaped with rubber grips: large handle to easily push the spreader through snow and over ice; comfortable to grip with gloves; some assembly required
  • Rear and side baffles: target where the ice melt should go by setting the side baffles; better direction and less wasted product; the fixed rear baffle keeps particles from spraying backwards towards you while spreading
  • Spiked auger: breaks up clumps so your preferred salt or ice melt can easily flows through the gate opening
  • Gate lever: change the gate opening based on the particulates; recommended for use with salt, halite, potassium chloride, magnesium chloride and calcium chloride (small and pelletized particulates)
  • Tires and accessories: 12-inch pneumatic, wide-tread tires move over uneven ground; rain/snow cover included to protect particulates while spreading
  • Note: not recommended for use with rock salt products, sand or sand mixes, pelletized lime, lime or lime powders

      Applications: pretreat and de-ice solutions

      Documents & Support

      Chapin 82104B Professional Salt & Ice Melt Spreader Product Manual
      Chapin Warranty Information
      Salt Spreader Technical Support Videos
      IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING.

      Questions on chemical compatibility? Contact Tech Support! (Online Form)


      Technical Specs

      Model Number

      82104B

      Hopper Material

      poly

      Hopper Capacity (pounds)

      80

      Frame Material

      stainless steel

      Handle Type

      t-handle with rubber grips

      Handle Material

      stainless steel

      Baffle

      fixed rear and adjustable sides

      Gear Box

      enclosed

      Gear Material

      metal-alloy

      Impeller

      designed for even spread pattern

      Axel Material

      metal-alloy

      Grate

      yes

      Gate Control

      adjustable lever

      Linkage

      stainless steel

      Agitator Type

      spiked auger

      Wheel Size (inches)

      12

      Wheel Type

      pneumatic

      Rain Cover

      yes

      Item Weight (pounds)

      38.5

      Due to our ongoing product improvement process, product specifications may change without notice.

      Chapin’s 82104B professional salt spreader is designed and built as a professional, contractor spreader to spread ice melt and salt along sidewalks and professional buildings and is simple enough for a homeowner to use as a salt spreader for their driveway. Our professional salt spreader includes a spiked auger to tear up clumps of salt or ice melt to not clog while spreading. Its rubber grips on the t-shaped stainless steel handle make it easier to push along uneven surfaces, especially while wearing gloves. The 82104B professional salt spread comes with a fixed rear and adjustable side baffles to control where you’re spreading and an adjustable gate to control the amount you’re spreading. A rain cover and grate is included. This unit is not recommended for use with rock salt, sand, or sand mixes. Made in the USA with global materials and backed by Chapin’s 5-year limited warranty.

      • 80-pound capacity hopper: rust-resistant, blue poly holds up to 80 pounds of material and is supported on stainless steel frame; enclosed gears are protected from the weather
      • Made in the USA with global materials: designed and produced in the USA with US-based customer service and technical support, located at Chapin’s home base in Batavia, NY; backed by Chapin’s 5-year limited warranty
      • T-shaped with rubber grips: large handle to easily push the spreader through snow and over ice; comfortable to grip with gloves; some assembly required
      • Rear and side baffles: target where the ice melt should go by setting the side baffles; better direction and less wasted product; the fixed rear baffle keeps particles from spraying backwards towards you while spreading
      • Spiked auger: breaks up clumps so your preferred salt or ice melt can easily flows through the gate opening
      • Gate lever: change the gate opening based on the particulates; recommended for use with salt, halite, potassium chloride, magnesium chloride and calcium chloride (small and pelletized particulates)
      • Tires and accessories: 12-inch pneumatic, wide-tread tires move over uneven ground; rain/snow cover included to protect particulates while spreading
      • Note: not recommended for use with rock salt products, sand or sand mixes, pelletized lime, lime or lime powders

          Applications: pretreat and de-ice solutions

          Documents & Support

          Chapin 82104B Professional Salt & Ice Melt Spreader Product Manual
          Chapin Warranty Information
          Salt Spreader Technical Support Videos
          IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING.

          Questions on chemical compatibility? Contact Tech Support! (Online Form)


          Technical Specs

          Model Number

          82104B

          Hopper Material

          poly

          Hopper Capacity (pounds)

          80

          Frame Material

          stainless steel

          Handle Type

          t-handle with rubber grips

          Handle Material

          stainless steel

          Baffle

          fixed rear and adjustable sides

          Gear Box

          enclosed

          Gear Material

          metal-alloy

          Impeller

          designed for even spread pattern

          Axel Material

          metal-alloy

          Grate

          yes

          Gate Control

          adjustable lever

          Linkage

          stainless steel

          Agitator Type

          spiked auger

          Wheel Size (inches)

          12

          Wheel Type

          pneumatic

          Rain Cover

          yes

          Item Weight (pounds)

          38.5

          Due to our ongoing product improvement process, product specifications may change without notice.