Chapin 82500B: 100-pound Stainless Steel Professional Broadcast Salt Spreader
#82500B
We currently have 51 in stock.
Warning: Cancer and Reproductive Harm.
Advertencia: Cáncer y Daños Reproductivos.
Avertissement: Cancer et Dommages Reproductifs.
- Large, one-piece hopper with rolled edges, no welds
- Rugged stainless steel frame and hardware
- Solid linkage for full gate control opens and closes the gate in incremental steps
- Enclosed metal gears with grease fitting
- Spiked auger tears up clumps
- Baffle system for edge control on any terrain
- Grate and cover included
- Stainless steel T handle with rubber grips
- Wide tread 14-inch pneumatic tires
- Recommended for large particulates, inconsistent in size: Rock Salt and Ice Melt
- Recommended for small and pelletized particulates: salt, ice melt, Halite, potassium chloride, magnesium chloride and calcium chloride
- *NOTE: not recommended for use with sand or sand mixes
Applications: Rock Salt, Ice Melt
Documents & Support
| Chapin 82500B Professional Stainless Steel Salt Spreader Product Manual |
| Chapin Warranty Information |
| Salt Spreader Technical Support Videos |
| IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING. |
Questions on chemical compatibility? Contact Tech Support! (Online Form) |
NOTE: Regardless of the material used, spreaders should be cleaned out after every use to ensure a lifetime of service. Some materials are much more aggressive oxidizers than others. Magnesium chloride will rust any stainless or mild steel materials in wet conditions in a matter of days. Calcium chloride is less aggressive but will rust stainless or mild steel in a matter of weeks. The ice melting chlorides are normally used when temperatures drop below 20 degrees Fahrenheit or in ‘pet safe’ or ‘environmentally friendly’ ice melt products. Regular rock salt or calcium will take a couple of months to cause rust. This is why it is important to wash out after each and every use.
Replacement Parts
| Ref. # | Qty | Part No. | Description |
| 1 | 1 | 6-9068 | Gearbox assembly |
| 2 | 1 | 6-9009 | Driveshaft with 2 bearings |
| 3 | 1 | 6-9038 | Gate control assembly |
| 4 | 1 | 6-9058 | Impeller |
| 5 | 1 | 6-9015 | Wheels with hardware |
| 6 | 1 | 6-9025 | Salt baffles |
| 7 | 1 | 6-9050 | Rear baffle |
| 8 | 1 | 6-9067 | Auger |
| 9 |
1 | 6-9093 | Hardware blister kit |
| 10 |
1 | 6-9053 | Grate |
| 11 | 1 | 6-9054 | Rain cover |
Not all parts are available for purchase on our website. Please call Customer Service to order parts if you don't see your part listed. 1-800-444-3140
Technical Specs
Model Number |
82500B |
Hopper Material |
stainless steel |
Hopper Capacity (pounds) |
100 |
Frame Material |
stainless |
Handle Type |
t-handle with rubber grip |
Handle Material |
stainless steel |
Baffle |
fixed rear and adjustable sides |
Gear Box |
enclosed with grease fitting |
Gear Material |
metal-alloy |
Impeller |
designed for even spread pattern |
Axel Material |
metal-alloy |
Grate |
yes |
Gate Control |
adjustable lever |
Linkage |
stainless steel |
Agitator Type |
spiked auger |
Wheel Size (inches) |
14 |
Wheel Type |
pneumatic |
Rain Cover |
yes |
Item Dimensions (L x W x H – inches) |
27.5 x 44.5 x 32 |
Item Weight (pounds) |
52.5 |
Warranty |
5-year limited |
Due to our ongoing product improvement process, product specifications may change without notice.
- Large, one-piece hopper with rolled edges, no welds
- Rugged stainless steel frame and hardware
- Solid linkage for full gate control opens and closes the gate in incremental steps
- Enclosed metal gears with grease fitting
- Spiked auger tears up clumps
- Baffle system for edge control on any terrain
- Grate and cover included
- Stainless steel T handle with rubber grips
- Wide tread 14-inch pneumatic tires
- Recommended for large particulates, inconsistent in size: Rock Salt and Ice Melt
- Recommended for small and pelletized particulates: salt, ice melt, Halite, potassium chloride, magnesium chloride and calcium chloride
- *NOTE: not recommended for use with sand or sand mixes
Applications: Rock Salt, Ice Melt
Documents & Support
| Chapin 82500B Professional Stainless Steel Salt Spreader Product Manual |
| Chapin Warranty Information |
| Salt Spreader Technical Support Videos |
| IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING. |
Questions on chemical compatibility? Contact Tech Support! (Online Form) |
NOTE: Regardless of the material used, spreaders should be cleaned out after every use to ensure a lifetime of service. Some materials are much more aggressive oxidizers than others. Magnesium chloride will rust any stainless or mild steel materials in wet conditions in a matter of days. Calcium chloride is less aggressive but will rust stainless or mild steel in a matter of weeks. The ice melting chlorides are normally used when temperatures drop below 20 degrees Fahrenheit or in ‘pet safe’ or ‘environmentally friendly’ ice melt products. Regular rock salt or calcium will take a couple of months to cause rust. This is why it is important to wash out after each and every use.
Replacement Parts
| Ref. # | Qty | Part No. | Description |
| 1 | 1 | 6-9068 | Gearbox assembly |
| 2 | 1 | 6-9009 | Driveshaft with 2 bearings |
| 3 | 1 | 6-9038 | Gate control assembly |
| 4 | 1 | 6-9058 | Impeller |
| 5 | 1 | 6-9015 | Wheels with hardware |
| 6 | 1 | 6-9025 | Salt baffles |
| 7 | 1 | 6-9050 | Rear baffle |
| 8 | 1 | 6-9067 | Auger |
| 9 |
1 | 6-9093 | Hardware blister kit |
| 10 |
1 | 6-9053 | Grate |
| 11 | 1 | 6-9054 | Rain cover |
Not all parts are available for purchase on our website. Please call Customer Service to order parts if you don't see your part listed. 1-800-444-3140
Technical Specs
Model Number |
82500B |
Hopper Material |
stainless steel |
Hopper Capacity (pounds) |
100 |
Frame Material |
stainless |
Handle Type |
t-handle with rubber grip |
Handle Material |
stainless steel |
Baffle |
fixed rear and adjustable sides |
Gear Box |
enclosed with grease fitting |
Gear Material |
metal-alloy |
Impeller |
designed for even spread pattern |
Axel Material |
metal-alloy |
Grate |
yes |
Gate Control |
adjustable lever |
Linkage |
stainless steel |
Agitator Type |
spiked auger |
Wheel Size (inches) |
14 |
Wheel Type |
pneumatic |
Rain Cover |
yes |
Item Dimensions (L x W x H – inches) |
27.5 x 44.5 x 32 |
Item Weight (pounds) |
52.5 |
Warranty |
5-year limited |
Due to our ongoing product improvement process, product specifications may change without notice.
