website

Chapin 8500B: 200-pound Stainless Steel Professional Rock Salt Drop Spreader

#8500B

  • $1,312.49
    Unit price per 
  • Save $187.50
Shipping calculated at checkout.

PrintWarning: Cancer and Reproductive Harm.

Print Advertencia: Cáncer y Daños Reproductivos.

PrintAvertissement: Cancer et Dommages Reproductifs.

Print www.P65Warnings.ca.gov.


Chapin's professional salt spreaders are designed and built to provide you superior performance. With all of the features and functionality needed for reliability and efficiency, you'll be using this spreader season after season. Our 8500B 200-Pound (90.7 kg) stainless steel professional rock salt drop spreader has a large one-piece hopper with rolled edges, a rugged stainless steel frame, solid linkage for full gate control, chain-driven agitators to minimize clumping and improve product flow, and 12-inch (30.48 cm) pneumatic tires to cover just about any terrain. This unit not recommended for sand and sand mixes.
  • 36-inch (91.4 cm) deep drawn Stainless Steel hopper (seamless with no welds)
  • 200-pound (90.7 kg) capacity
  • Discharge holes located behind the wheels for a full 36-inch (91.4 cm) drop width
  • Independent left and right solid linkage gate controls
  • Drive train - split axle, wheels drive left and right agitators independently to break up salt
  • Stainless steel drive chains resist corrosion and provide unfailing torque to destroy clumps of salt
  • Third idler wheel for easy maneuvering Pneumatic tires for maximum traction
  • Recommended for large particulates, inconsistent in size: rock salt and ice melt
  • *NOTE: not recommended for use with sand or sand mixes

Applications: Rock Salt, Ice Melt

Documents & Support

Chapin 8500B Stainless Steel Rock Salt Drop Spreader Product Manual
Chapin Warranty Information
Salt Spreader Technical Support Videos

Questions on chemical compatibility? Contact Tech Support! (Online Form)

IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING.

NOTE: Regardless of the material used, spreaders should be cleaned out after every use to ensure a lifetime of service. Some materials are much more aggressive oxidizers than others.  Magnesium chloride will rust any stainless or mild steel materials in wet conditions in a matter of days.  Calcium chloride is less aggressive but will rust stainless or mild steel in a matter of weeks.  The ice melting chlorides are normally used when temperatures drop below 20 degrees Fahrenheit or in ‘pet safe’ or ‘environmentally friendly’ ice melt products. Regular rock salt or calcium will take a couple of months to cause rust.  This is why it is important to wash out after each and every use.

Replacement Parts

Ref. # Qty Part No. Description
1 1 6-8062 Handle grips
2 1 6-8281 Gate control assembly
3 1 6-9078 Wheels with Hardware
4 1 6-8275 Axel bearings
5 1 6-8276 Gate drive kit
6 1 6-8277 Auger bearing kit
7 1 6-8278 Auger assembly
8 1 6-8279 Caster
9 1 6-8283 Slide gate hardware

Not all parts are available for purchase on our website. Please call Customer Service to order parts if you don't see your part listed. 1-800-444-3140

Chapin 8500B Replacement Parts

Technical Specs

Model Number

8500B

Hopper Material

stainless steel

Hopper Capacity (pounds)

200

Frame Material

stainless steel

Handle Type

t-handle with rubber grips

Handle Material

stainless steel

Baffle

no

Gear Box

enclosed

Gear Material

metal-alloy

Impeller

no

Axel Material

metal-alloy

Grate

no

Gate Control

adjustable lever

Linkage

stainless steel

Agitator Type

dual grinder

Wheel Size (inches)

14

Wheel Type

pneumatic

Rain Cover

no

Item Dimensions (L x W x H – inches)

58 x 29 x 29

Item Weight (pounds)

75.5

Warranty

limited lifetime

Due to our ongoing product improvement process, product specifications may change without notice.

Chapin's professional salt spreaders are designed and built to provide you superior performance. With all of the features and functionality needed for reliability and efficiency, you'll be using this spreader season after season. Our 8500B 200-Pound (90.7 kg) stainless steel professional rock salt drop spreader has a large one-piece hopper with rolled edges, a rugged stainless steel frame, solid linkage for full gate control, chain-driven agitators to minimize clumping and improve product flow, and 12-inch (30.48 cm) pneumatic tires to cover just about any terrain. This unit not recommended for sand and sand mixes.
  • 36-inch (91.4 cm) deep drawn Stainless Steel hopper (seamless with no welds)
  • 200-pound (90.7 kg) capacity
  • Discharge holes located behind the wheels for a full 36-inch (91.4 cm) drop width
  • Independent left and right solid linkage gate controls
  • Drive train - split axle, wheels drive left and right agitators independently to break up salt
  • Stainless steel drive chains resist corrosion and provide unfailing torque to destroy clumps of salt
  • Third idler wheel for easy maneuvering Pneumatic tires for maximum traction
  • Recommended for large particulates, inconsistent in size: rock salt and ice melt
  • *NOTE: not recommended for use with sand or sand mixes

Applications: Rock Salt, Ice Melt

Documents & Support

Chapin 8500B Stainless Steel Rock Salt Drop Spreader Product Manual
Chapin Warranty Information
Salt Spreader Technical Support Videos

Questions on chemical compatibility? Contact Tech Support! (Online Form)

IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING.

NOTE: Regardless of the material used, spreaders should be cleaned out after every use to ensure a lifetime of service. Some materials are much more aggressive oxidizers than others.  Magnesium chloride will rust any stainless or mild steel materials in wet conditions in a matter of days.  Calcium chloride is less aggressive but will rust stainless or mild steel in a matter of weeks.  The ice melting chlorides are normally used when temperatures drop below 20 degrees Fahrenheit or in ‘pet safe’ or ‘environmentally friendly’ ice melt products. Regular rock salt or calcium will take a couple of months to cause rust.  This is why it is important to wash out after each and every use.

Replacement Parts

Ref. # Qty Part No. Description
1 1 6-8062 Handle grips
2 1 6-8281 Gate control assembly
3 1 6-9078 Wheels with Hardware
4 1 6-8275 Axel bearings
5 1 6-8276 Gate drive kit
6 1 6-8277 Auger bearing kit
7 1 6-8278 Auger assembly
8 1 6-8279 Caster
9 1 6-8283 Slide gate hardware

Not all parts are available for purchase on our website. Please call Customer Service to order parts if you don't see your part listed. 1-800-444-3140

Chapin 8500B Replacement Parts

Technical Specs

Model Number

8500B

Hopper Material

stainless steel

Hopper Capacity (pounds)

200

Frame Material

stainless steel

Handle Type

t-handle with rubber grips

Handle Material

stainless steel

Baffle

no

Gear Box

enclosed

Gear Material

metal-alloy

Impeller

no

Axel Material

metal-alloy

Grate

no

Gate Control

adjustable lever

Linkage

stainless steel

Agitator Type

dual grinder

Wheel Size (inches)

14

Wheel Type

pneumatic

Rain Cover

no

Item Dimensions (L x W x H – inches)

58 x 29 x 29

Item Weight (pounds)

75.5

Warranty

limited lifetime

Due to our ongoing product improvement process, product specifications may change without notice.