22350XP 2-gallon Industrial Cleaner & Degreaser Sprayer

#22350XP

  • $89.99
    Unit price per 
Shipping calculated at checkout.

PrintWarning: Cancer and Reproductive Harm.

Print Advertencia: Cáncer y Daños Reproductivos.

PrintAvertissement: Cancer et Dommages Reproductifs.

Print www.P65Warnings.ca.gov.


Servicing HVAC units, cleaning engines or working with large scale equipment? Reach for our 22350XP industrial cleaner/degreaser sprayer.

Chapin designed this sprayer to handle a variety of cleaners and degreasers for industrial use. With its two-gallon tank you’ll have plenty of solution to cover larger areas. The four-inch mouth opening allows you to easily fill it and clean it after use. The adjustable poly-cone nozzle is standard and gives you the option of a coarse stream or fine mist depending on the task. We built in a pressure relief valve and lock-off mechanism to prevent accidental discharge of chemicals.

  • 2 g poly tank and 4 in wide mouth opening
  • Designed specifically for industrial strength cleaners and degreasers
  • Chemical-resistant seals
  • Pressure relief valve and lock-off feature to prevent accidental discharge
  • Adjustable poly cone nozzle sprays coarse stream to a fine mist
  • Carrying strap not included, purchase separately
  • Made in the USA

    Applications: cleaning, degreasing, general-purpose cleaning

     

    Chapin Product Manual graphic - red book with Product Manual

    Chapin 22350XP Manual

     

    Storage & Maintenance

    1. Rinse tank thoroughly with water only, empty, refill with water.
    2. Follow Filling, Pressurizing and Spraying Instructions, but also pump unit only 8-10 strokes.
    3. Be sure that the wand and nozzle are thoroughly rinsed with water after each use.
    4. Open shut-off and allow water to run through discharge assembly.
    5. Release pressure (Follow Pressure Release Instructions), remove pump, and empty sprayer.
    6. Store sprayer tank upside down, with pump removed, in a warm dry location.
    7. Periodically oil pump by dropping 10-12 drops of light oil down pump rod through opening in cover.

     

    Technical Specs

    Model Number 22350XP
    Tank Size 2 g
    Tank Mouth Opening 4 in
    Tank Construction poly
    Hose Length 42 in
    Hose Material reinforced
    Extension Wand Material poly
    Extension Wand Length
    12 in
    Shut-off Material poly
    Lock-on Feature yes
    Nozzle(s) poly-cone
    Filters in-tank
    Handle metal-alloy
    Pump Type piston
    Pressure relief valve yes
    Spray/Flow Rate 0.4 - 0.5 gpm
    PSI - Operating Pressure 40-60 psi
    Spray Stream Max Vertical
    25 ft
    Spray Stream Max Horiz.
    23 ft
    Warranty 2-year limited
    Shipping Weight 
    5.1 lb
    Item Dimensions (l x w x h) 
    7.8 in x 7.8 in x 19.3 in
    Item Weight  4.6 lb
    Carrying Straps not included, optional part

     

    *Spray distance is dependent on many factors such as adjusted nozzle orifice size, tank pressure, wind interference and angle of inclination. Spray distances may vary based on user's specific application.

    Improper use or failure to follow instructions can result in explosive failure causing serious eye or other injury.

    Read the enclosed instruction manual before use.

    Wear goggles and protective gear.

    Never spray flammable, caustic, corrosive or pressure and gas-producing chemicals. Always read and follow chemical manufacturer’s instructions before use with this sprayer as some chemicals may be hazardous when used with this sprayer.

    Empty and clean tank after use and release pressure before disassembly.

    Do not modify sprayer.

    Do not leave a pressurized sprayer in the hot sun. Heat can cause pressure build-up resulting in possible explosion.

    Do not store or leave solution in tank after use. Never use any tool to remove pump if there is pressure in sprayer. Never stand with face or body over top of tank when pumping or loosening pump to prevent ejecting pump assembly and/or solution from striking and injuring you. Never pressurize sprayer by any means other than the original pump. Replace parts only with manufacturer’s original parts.