website

Chapin 82108B: 100-pound Professional & Residential Salt and Ice Melt Broadcast Spreader

#82108B

PrintWarning: Cancer and Reproductive Harm.

Print Advertencia: Cáncer y Daños Reproductivos.

PrintAvertissement: Cancer et Dommages Reproductifs.

Print www.P65Warnings.ca.gov.


Chapin Professional Spreaders were built to provide all of the features and functionality needed for reliable, efficient performance. The 100-pound Salt and Ice Melt Spreader has a large, 2-piece hopper design that boasts stainless steel handles and a rugged stainless steel frame, solid linkage for full gate control, spiked auger to help move salt and tear through clumps, 14-inch pneumatic tires for just about any terrain, front and side baffle system for precise control of spread pattern and enclosed metal gears with grease fitting to withstand the elements. Protective rain/snow cover included. This unit is not recommended for use with rock salt, sand, or sand mixes. Made in the USA with global materials.
  • 100-Pound capacity hopper with enclosed gear system with grease fitting to withstand the elements, supported by a rugged stainless steel frame
  • Recommended for use with salt, Halite, potassium chloride, magnesium chloride and calcium chloride (small and pelletized particulates)
  • Innovative gate control, make gate changes from the handle
  • Spiked auger tears up clumps
  • Includes a protective rain/snow cover
  • Front and side baffle system for precise control of the spread pattern
  • 14-inch pneumatic tires for stability over uneven terrain
  • *NOTE: not recommended for use with rock salt, sand or sand mixes

Applications: pretreat and de-ice solutions

Documents & Support

Chapin 82108B Professional Salt & Ice Melt Spreader Product Manual
Chapin Warranty Information
Salt Spreader Technical Support Videos
IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING.

Questions on chemical compatibility? Contact Tech Support! (Online Form)


Replacement Parts

Ref. # Qty Part No. Description
1 1 6-9032 Hopper base assembly
2 1 6-9068 Gearbox assembly
3 1 6-9009 Driveshaft with 2 bearings
4 1 6-9038 Gate control assembly
5 1 6-9014 Impeller
6
1 6-9015 Wheels with hardware
7
1 6-9016 Handle grips
8
1 6-9093 Hardware blister kit
9
1 6-9001 Grate
10
1 6-9025 Salt baffles
11
1 6-9050 Rear baffles
12
1 6-9000 Rain cover
13 1 6-9067 Auger

Not all parts are available for purchase on our website. Please call Customer Service to order parts if you don't see your part listed. 1-800-444-3140

Chapin 82108 Spreader replacement parts

Technical Specs

Model Number

82108B

Hopper Material

poly

Hopper Capacity (pounds)

100

Frame Material

stainless steel

Handle Type

t-handle with rubber grips

Handle Material

stainless steel

Baffle

fixed rear and adjustable sides

Gear Box

enclosed

Gear Material

metal-alloy

Impeller

designed for even spread pattern

Axel Material

metal-alloy

Grate

yes

Gate Control

adjustable lever

Linkage

stainless steel

Agitator Type

spiked auger

Wheel Size (inches)

14

Wheel Type

pneumatic

Rain Cover

yes

Item Dimensions (L x W x H – inches)

38 x 24 x 36

Item Weight (pounds)

38.5

Warranty

limited lifetime

Due to our ongoing product improvement process, product specifications may change without notice.

Chapin Professional Spreaders were built to provide all of the features and functionality needed for reliable, efficient performance. The 100-pound Salt and Ice Melt Spreader has a large, 2-piece hopper design that boasts stainless steel handles and a rugged stainless steel frame, solid linkage for full gate control, spiked auger to help move salt and tear through clumps, 14-inch pneumatic tires for just about any terrain, front and side baffle system for precise control of spread pattern and enclosed metal gears with grease fitting to withstand the elements. Protective rain/snow cover included. This unit is not recommended for use with rock salt, sand, or sand mixes. Made in the USA with global materials.
  • 100-Pound capacity hopper with enclosed gear system with grease fitting to withstand the elements, supported by a rugged stainless steel frame
  • Recommended for use with salt, Halite, potassium chloride, magnesium chloride and calcium chloride (small and pelletized particulates)
  • Innovative gate control, make gate changes from the handle
  • Spiked auger tears up clumps
  • Includes a protective rain/snow cover
  • Front and side baffle system for precise control of the spread pattern
  • 14-inch pneumatic tires for stability over uneven terrain
  • *NOTE: not recommended for use with rock salt, sand or sand mixes

Applications: pretreat and de-ice solutions

Documents & Support

Chapin 82108B Professional Salt & Ice Melt Spreader Product Manual
Chapin Warranty Information
Salt Spreader Technical Support Videos
IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING.

Questions on chemical compatibility? Contact Tech Support! (Online Form)


Replacement Parts

Ref. # Qty Part No. Description
1 1 6-9032 Hopper base assembly
2 1 6-9068 Gearbox assembly
3 1 6-9009 Driveshaft with 2 bearings
4 1 6-9038 Gate control assembly
5 1 6-9014 Impeller
6
1 6-9015 Wheels with hardware
7
1 6-9016 Handle grips
8
1 6-9093 Hardware blister kit
9
1 6-9001 Grate
10
1 6-9025 Salt baffles
11
1 6-9050 Rear baffles
12
1 6-9000 Rain cover
13 1 6-9067 Auger

Not all parts are available for purchase on our website. Please call Customer Service to order parts if you don't see your part listed. 1-800-444-3140

Chapin 82108 Spreader replacement parts

Technical Specs

Model Number

82108B

Hopper Material

poly

Hopper Capacity (pounds)

100

Frame Material

stainless steel

Handle Type

t-handle with rubber grips

Handle Material

stainless steel

Baffle

fixed rear and adjustable sides

Gear Box

enclosed

Gear Material

metal-alloy

Impeller

designed for even spread pattern

Axel Material

metal-alloy

Grate

yes

Gate Control

adjustable lever

Linkage

stainless steel

Agitator Type

spiked auger

Wheel Size (inches)

14

Wheel Type

pneumatic

Rain Cover

yes

Item Dimensions (L x W x H – inches)

38 x 24 x 36

Item Weight (pounds)

38.5

Warranty

limited lifetime

Due to our ongoing product improvement process, product specifications may change without notice.