Chapin 81008A 80-pound Residential Salt and Ice Melt Broadcast Spreader
#81008A
The product is out of stock
Warning: Cancer and Reproductive Harm.
Advertencia: Cáncer y Daños Reproductivos.
Avertissement: Cancer et Dommages Reproductifs.
Designed for residential use, Chapin’s 81008A 80-pound residential salt/ice melt spreader has a weather-resistant poly hopper to fill with your preferred ice melt, halite or small particulates. Supported on a powder-coated steel frame with an ergonomically-designed bail system and U-shaped flip up handle, it’s simple to operate and holds up season-after-season. The baffles adjust for edge control and the pneumatic tires handle uneven ground. This unit is not recommended for rock salt, sand or sand mixes, pelletized lime, lime or lime powders. A spiked auger helps tear up clumps and keeps the ice melt moving freely. Made in the USA with global materials and backed by Chapin’s 2-year limited warranty.
- 80-pound capacity hopper: rust-resistant, weather-resistant, blue poly hopper is supported on a powder-coated steel frame; enclosed acetal gearbox keeps the gears protected from harsh weather
- U-shaped, ergonomic, flip-up handle: limited assembly with the U-shaped handle, it simply flips up when removed from the box; comfortable to grip with gloves and push while spreading ice melt and salt products
- Made in the USA with global materials: designed and produced in the USA with US-based customer service and technical support, located at Chapin’s home base in Batavia, NY; backed by Chapin’s 2-year limited warranty
- Spiked auger: rugged, plastic spiked auger breaks up clumps so your preferred salt or ice melt can easily flows through the gate opening
- Adjustable settings: use the gate lever to change the gate opening based on the particulates; recommended for use with salt, halite, potassium chloride, magnesium chloride and calcium chloride (small and pelletized particulates); use the baffles for direct the spread where it’s needed and save money from wasted product
- Tires and accessories: wide-tread, 10-inch pneumatic tires to move over uneven ground; rain/snow cover included to protect salt/ice melt while spreading and salt grate to help filter larger clumps from clogging up at the auger
Applications: fertilizing, seeding, weed control
Documents & Support
Chapin 81008A Residential Salt & Ice Melt Spreader Product Manual |
Chapin Warranty Information |
Turf Spreader Technical Support Videos |
IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING. |
Questions on chemical compatibility? Contact Tech Support! (Online Form) |
Technical Specs
Model Number |
81000A |
Hopper Material |
poly |
Hopper Capacity (pounds) |
80 |
Frame Material |
powder-coated |
Handle Type |
u-shaped |
Handle Material |
powder-coated |
Baffle |
sides and front |
Gear Box |
enclosed |
Gear Material |
acetal |
Impeller |
designed for even spread pattern |
Axle Material |
metal-alloy |
Grate |
no |
Gate Control |
adjustable lever |
Linkage |
ambidextrous bail cable |
Agitator Type |
spiked-poly |
Wheel Size (inches) |
10 |
Wheel Type |
pneumatic |
Rain Cover |
no |
Item Dimensions (L x W x H – inches) |
38 x 24 x 36 |
Item Weight (pounds) |
24.5 |
Warranty |
2-year limited |
Due to our ongoing product improvement process, product specifications may change without notice.
Designed for residential use, Chapin’s 81008A 80-pound residential salt/ice melt spreader has a weather-resistant poly hopper to fill with your preferred ice melt, halite or small particulates. Supported on a powder-coated steel frame with an ergonomically-designed bail system and U-shaped flip up handle, it’s simple to operate and holds up season-after-season. The baffles adjust for edge control and the pneumatic tires handle uneven ground. This unit is not recommended for rock salt, sand or sand mixes, pelletized lime, lime or lime powders. A spiked auger helps tear up clumps and keeps the ice melt moving freely. Made in the USA with global materials and backed by Chapin’s 2-year limited warranty.
- 80-pound capacity hopper: rust-resistant, weather-resistant, blue poly hopper is supported on a powder-coated steel frame; enclosed acetal gearbox keeps the gears protected from harsh weather
- U-shaped, ergonomic, flip-up handle: limited assembly with the U-shaped handle, it simply flips up when removed from the box; comfortable to grip with gloves and push while spreading ice melt and salt products
- Made in the USA with global materials: designed and produced in the USA with US-based customer service and technical support, located at Chapin’s home base in Batavia, NY; backed by Chapin’s 2-year limited warranty
- Spiked auger: rugged, plastic spiked auger breaks up clumps so your preferred salt or ice melt can easily flows through the gate opening
- Adjustable settings: use the gate lever to change the gate opening based on the particulates; recommended for use with salt, halite, potassium chloride, magnesium chloride and calcium chloride (small and pelletized particulates); use the baffles for direct the spread where it’s needed and save money from wasted product
- Tires and accessories: wide-tread, 10-inch pneumatic tires to move over uneven ground; rain/snow cover included to protect salt/ice melt while spreading and salt grate to help filter larger clumps from clogging up at the auger
Applications: fertilizing, seeding, weed control
Documents & Support
Chapin 81008A Residential Salt & Ice Melt Spreader Product Manual |
Chapin Warranty Information |
Turf Spreader Technical Support Videos |
IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING. |
Questions on chemical compatibility? Contact Tech Support! (Online Form) |
Technical Specs
Model Number |
81000A |
Hopper Material |
poly |
Hopper Capacity (pounds) |
80 |
Frame Material |
powder-coated |
Handle Type |
u-shaped |
Handle Material |
powder-coated |
Baffle |
sides and front |
Gear Box |
enclosed |
Gear Material |
acetal |
Impeller |
designed for even spread pattern |
Axle Material |
metal-alloy |
Grate |
no |
Gate Control |
adjustable lever |
Linkage |
ambidextrous bail cable |
Agitator Type |
spiked-poly |
Wheel Size (inches) |
10 |
Wheel Type |
pneumatic |
Rain Cover |
no |
Item Dimensions (L x W x H – inches) |
38 x 24 x 36 |
Item Weight (pounds) |
24.5 |
Warranty |
2-year limited |
Due to our ongoing product improvement process, product specifications may change without notice.