Chapin 8400C: 100-pound Professional Broadcast Turf Spreader with Stainless Steel Frame
#8400C
We currently have 262 in stock.
Warning: Cancer and Reproductive Harm.
Advertencia: Cáncer y Daños Reproductivos.
Avertissement: Cancer et Dommages Reproductifs.
Chapin's 8400C professional turf spreader provides superior performance, season-after-season, with its 1-piece red poly hopper and molded finger grips, T-handle with rubber grips and stainless steel frame. The adjustable rotary gate accommodates a variety of material, and a cast zinc-plated agitator helps prevent clumping. Directional spread pattern control ensures the material is applied where it is needed. 14-inch pneumatic tires keep it steady on grass and hills. A rain cover and hopper grate are included. Made in the USA with global materials and backed by Chapin’s 5-year limited warranty.
- 100-pound capacity hopper: weather and rust-resistant, red, 1-piece poly is supported on a stainless steel frame; enclosed gearbox products it from weather and a grease fitting minimizes friction; rain cover and hopper grate are included
- Made in the USA with global materials: designed and produced in the USA with US-based customer service and technical support, located at Chapin’s home base in Batavia, NY; backed by Chapin’s 5-year limited warranty
- T-shaped with rubber grips: large handle to easily push the spreader over grass and uneven ground, with or without work gloves
- Spread pattern control: adjustable rotary gate and steel gate linkage allows you to spread a range of products throughout the seasons; use your preferred brand of fertilizer, seed, weed control and pest control particles
- 14-inch pneumatic tires: designed to handle uneven farmland, acreage and tougher terrain; no need to worry about the hopper tipping while you’re working
- Note: assembly is required; not recommended for use with rock salt products, sand or sand mixes, pelletized lime, lime or lime powders
Applications: fertilizing, seeding, weed control
Documents & Support
| Chapin 8400C Professional Stainless Steel Frame Spreader Product Manual |
| Chapin Warranty Information |
| Turf Spreader Technical Support Videos |
| IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING. |
Questions on chemical compatibility? Contact Tech Support! (Online Form) |
Replacement Parts
| Ref. # | Qty | Part No. | Description |
| 1 | 1 | 6-9140 | Gearbox assembly |
| 2 | 1 | 6-9009 | Driveshaft with 2 bearings |
| 3 | 1 | 6-9060 | Gate control assembly |
| 4 | 1 | 6-9061 | Impeller |
| 5 | 1 | 6-9015 | Wheels with hardware |
| 6 | 1 | 6-9062 | Handle grips |
| 7 | 1 | 6-9086-1 | Hardware blister kit |
| 8 | 1 | 6-9151 | Hardware blister kit |
| 9 | 1 | 6-9070 | Grate |
| 10 | 1 | 6-9000 | Rain cover |
| 11 | 1 | 6-9125 | Auger |
| 12 | 1 | 6-9069 | Rear baffle |
Not all parts are available for purchase on our website. Please call Customer Service to order parts if you don't see your part listed. 1-800-444-3140
Technical Specs
Model Number |
8400C |
Hopper Material |
poly |
Hopper Capacity (pounds) |
100 (45 kg) |
Frame Material |
stainless steel |
Handle Type |
t-handle with rubber grips |
Handle Material |
stainless steel |
Baffle |
spread pattern control |
Gear Box |
enclosed with grease fitting |
Gear Material |
metal-alloy |
Impeller |
designed for even spread pattern |
Axel Material |
metal-alloy |
Grate |
yes |
Gate Control |
lever |
Linkage |
stainless steel |
Agitator Type |
cast zinc-plated |
Wheel Size (inches) |
14 |
Wheel Type |
pneumatic |
Rain Cover |
yes |
Item Dimensions (L x W x H – inches) |
24.5 x 18.875 x 14.375 (unassembled) |
Item Weight (pounds) |
38 |
Warranty |
5-year limited |
Due to our ongoing product improvement process, product specifications may change without notice.
Chapin's 8400C professional turf spreader provides superior performance, season-after-season, with its 1-piece red poly hopper and molded finger grips, T-handle with rubber grips and stainless steel frame. The adjustable rotary gate accommodates a variety of material, and a cast zinc-plated agitator helps prevent clumping. Directional spread pattern control ensures the material is applied where it is needed. 14-inch pneumatic tires keep it steady on grass and hills. A rain cover and hopper grate are included. Made in the USA with global materials and backed by Chapin’s 5-year limited warranty.
- 100-pound capacity hopper: weather and rust-resistant, red, 1-piece poly is supported on a stainless steel frame; enclosed gearbox products it from weather and a grease fitting minimizes friction; rain cover and hopper grate are included
- Made in the USA with global materials: designed and produced in the USA with US-based customer service and technical support, located at Chapin’s home base in Batavia, NY; backed by Chapin’s 5-year limited warranty
- T-shaped with rubber grips: large handle to easily push the spreader over grass and uneven ground, with or without work gloves
- Spread pattern control: adjustable rotary gate and steel gate linkage allows you to spread a range of products throughout the seasons; use your preferred brand of fertilizer, seed, weed control and pest control particles
- 14-inch pneumatic tires: designed to handle uneven farmland, acreage and tougher terrain; no need to worry about the hopper tipping while you’re working
- Note: assembly is required; not recommended for use with rock salt products, sand or sand mixes, pelletized lime, lime or lime powders
Applications: fertilizing, seeding, weed control
Documents & Support
| Chapin 8400C Professional Stainless Steel Frame Spreader Product Manual |
| Chapin Warranty Information |
| Turf Spreader Technical Support Videos |
| IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING. |
Questions on chemical compatibility? Contact Tech Support! (Online Form) |
Replacement Parts
| Ref. # | Qty | Part No. | Description |
| 1 | 1 | 6-9140 | Gearbox assembly |
| 2 | 1 | 6-9009 | Driveshaft with 2 bearings |
| 3 | 1 | 6-9060 | Gate control assembly |
| 4 | 1 | 6-9061 | Impeller |
| 5 | 1 | 6-9015 | Wheels with hardware |
| 6 | 1 | 6-9062 | Handle grips |
| 7 | 1 | 6-9086-1 | Hardware blister kit |
| 8 | 1 | 6-9151 | Hardware blister kit |
| 9 | 1 | 6-9070 | Grate |
| 10 | 1 | 6-9000 | Rain cover |
| 11 | 1 | 6-9125 | Auger |
| 12 | 1 | 6-9069 | Rear baffle |
Not all parts are available for purchase on our website. Please call Customer Service to order parts if you don't see your part listed. 1-800-444-3140
Technical Specs
Model Number |
8400C |
Hopper Material |
poly |
Hopper Capacity (pounds) |
100 (45 kg) |
Frame Material |
stainless steel |
Handle Type |
t-handle with rubber grips |
Handle Material |
stainless steel |
Baffle |
spread pattern control |
Gear Box |
enclosed with grease fitting |
Gear Material |
metal-alloy |
Impeller |
designed for even spread pattern |
Axel Material |
metal-alloy |
Grate |
yes |
Gate Control |
lever |
Linkage |
stainless steel |
Agitator Type |
cast zinc-plated |
Wheel Size (inches) |
14 |
Wheel Type |
pneumatic |
Rain Cover |
yes |
Item Dimensions (L x W x H – inches) |
24.5 x 18.875 x 14.375 (unassembled) |
Item Weight (pounds) |
38 |
Warranty |
5-year limited |
Due to our ongoing product improvement process, product specifications may change without notice.
