website

Chapin 82088B: 80-pound Professional SureSpread Salt and Ice Melt Broadcast Spreader with Baffles

#82088B

  • $314.99
    Unit price per 
  • Save $45
Shipping calculated at checkout.

PrintWarning: Cancer and Reproductive Harm.

Print Advertencia: Cáncer y Daños Reproductivos.

PrintAvertissement: Cancer et Dommages Reproductifs.

Print www.P65Warnings.ca.gov.


Chapin’s 82088B 80-pound poly SureSpread salt and ice melt spreader is commercial-grade and perfect for plow and snow removal companies or a residential driveway. The 80-pound poly hopper is rust and weather resistant. With a rugged powder-coated steel frame, solid steel linkage, T-shaped handle with rubber hand grips, full gate control and aggressive toothed auger, he 82088B is the full package. It also comes with a rain/snow cover to protect the product during snowy or rainy weather. Adjust the front and side baffles so you’re not spreading product where it’s not needed. Tough 12-inch pneumatic tires handle uneven winter ground. This unit is not recommended for use with salt products, sand or sand mixes, pelletized lime, lime or lime powders. Made in the USA with global materials and backed by Chapin’s 5-year limited warranty.

  • 80-pound capacity hopper: rust-resistant, blue poly holds up to 80 pounds of material and is supported on a powder-coated steel frame; enclosed gears are protected from the weather
  • Made in the USA with global materials: designed and produced in the USA with US-based customer service and technical support, located at Chapin’s home base in Batavia, NY; backed by Chapin’s 5-year limited warranty
  • T-shaped with rubber grips: large handle to easily push the spreader through snow and over ice; comfortable to grip with gloves; some assembly required
  • Front and side baffles: target where the ice melt should go by setting the front and side baffles; better direction and less wasted product
  • Toothed auger: breaks up clumps so your preferred salt or ice melt can easily flows through the gate opening
  • Gate lever: change the gate opening based on the particulates; recommended for use with salt, halite, potassium chloride, magnesium chloride and calcium chloride (small and pelletized particulates)
  • Tires and accessories: 12-inch pneumatic, wide-tread tires move over uneven ground; rain/snow cover included to protect particulates while spreading
  • Note: not recommended for use with rock salt products, sand or sand mixes, pelletized lime, lime or lime powders
Note: not recommended for use with salt products, sand or sand mixes, pelletized lime, lime or lime powders

    Applications: pretreat and de-ice solutions

    Documents & Support

    Chapin 82088B Professional SureSpread Salt & Ice Melt Spreader Product Manual
    Chapin Warranty Information
    Salt Spreader Technical Support Videos
    IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING.

    Questions on chemical compatibility? Contact Tech Support! (Online Form)


    Replacement Parts

    Ref. # Qty Part No. Description
    1 1 6-9068 Gearbox assembly
    2 1 6-9009 Driveshaft with 2 bearings
    3 1 6-9060 Gate control assembly
    4 1 6-9061 Impeller
    5 1 6-9078 Wheels with hardware
    6
    1 6-9062 Handle grips
    7
    1 6-9086-1 Hardware kit
    8 1 6-9151 Hardware kit
    9 1 6-9070 Grate
    10 1 6-9000 Rain cover
    11 1 6-9125 Auger kit
    12 1 6-9069 Rear baffle

    Not all parts are available for purchase on our website. Please call Customer Service to order parts if you don't see your part listed. 1-800-444-3140

    Chapin 82088 Replacement Parts

    Technical Specs

    Model Number

    82088B

    Hopper Material

    poly

    Hopper Capacity (pounds)

    80 (36.28 kg)

    Frame Material

    powder-coated

    Handle Type

    t-handle with rubber grips

    Handle Material

    powder-coated

    Baffle

    adjustable front and sides

    Gear Box

    enclosed

    Gear Material

    metal-alloy

    Impeller

    designed for even spread pattern

    Axel Material

    metal-alloy

    Grate

    yes

    Gate Control

    lever

    Linkage

    solid steel

    Agitator Type

    auger

    Wheel Size (inches)

    12

    Wheel Type

    pneumatic

    Rain Cover

    yes

    Item Dimensions (L x W x H – inches)

    38 x 24 x 36

    Item Weight (pounds)

    38.5

    Warranty

    5-year limited

    Due to our ongoing product improvement process, product specifications may change without notice.

    Chapin’s 82088B 80-pound poly SureSpread salt and ice melt spreader is commercial-grade and perfect for plow and snow removal companies or a residential driveway. The 80-pound poly hopper is rust and weather resistant. With a rugged powder-coated steel frame, solid steel linkage, T-shaped handle with rubber hand grips, full gate control and aggressive toothed auger, he 82088B is the full package. It also comes with a rain/snow cover to protect the product during snowy or rainy weather. Adjust the front and side baffles so you’re not spreading product where it’s not needed. Tough 12-inch pneumatic tires handle uneven winter ground. This unit is not recommended for use with salt products, sand or sand mixes, pelletized lime, lime or lime powders. Made in the USA with global materials and backed by Chapin’s 5-year limited warranty.

    • 80-pound capacity hopper: rust-resistant, blue poly holds up to 80 pounds of material and is supported on a powder-coated steel frame; enclosed gears are protected from the weather
    • Made in the USA with global materials: designed and produced in the USA with US-based customer service and technical support, located at Chapin’s home base in Batavia, NY; backed by Chapin’s 5-year limited warranty
    • T-shaped with rubber grips: large handle to easily push the spreader through snow and over ice; comfortable to grip with gloves; some assembly required
    • Front and side baffles: target where the ice melt should go by setting the front and side baffles; better direction and less wasted product
    • Toothed auger: breaks up clumps so your preferred salt or ice melt can easily flows through the gate opening
    • Gate lever: change the gate opening based on the particulates; recommended for use with salt, halite, potassium chloride, magnesium chloride and calcium chloride (small and pelletized particulates)
    • Tires and accessories: 12-inch pneumatic, wide-tread tires move over uneven ground; rain/snow cover included to protect particulates while spreading
    • Note: not recommended for use with rock salt products, sand or sand mixes, pelletized lime, lime or lime powders
    Note: not recommended for use with salt products, sand or sand mixes, pelletized lime, lime or lime powders

      Applications: pretreat and de-ice solutions

      Documents & Support

      Chapin 82088B Professional SureSpread Salt & Ice Melt Spreader Product Manual
      Chapin Warranty Information
      Salt Spreader Technical Support Videos
      IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING.

      Questions on chemical compatibility? Contact Tech Support! (Online Form)


      Replacement Parts

      Ref. # Qty Part No. Description
      1 1 6-9068 Gearbox assembly
      2 1 6-9009 Driveshaft with 2 bearings
      3 1 6-9060 Gate control assembly
      4 1 6-9061 Impeller
      5 1 6-9078 Wheels with hardware
      6
      1 6-9062 Handle grips
      7
      1 6-9086-1 Hardware kit
      8 1 6-9151 Hardware kit
      9 1 6-9070 Grate
      10 1 6-9000 Rain cover
      11 1 6-9125 Auger kit
      12 1 6-9069 Rear baffle

      Not all parts are available for purchase on our website. Please call Customer Service to order parts if you don't see your part listed. 1-800-444-3140

      Chapin 82088 Replacement Parts

      Technical Specs

      Model Number

      82088B

      Hopper Material

      poly

      Hopper Capacity (pounds)

      80 (36.28 kg)

      Frame Material

      powder-coated

      Handle Type

      t-handle with rubber grips

      Handle Material

      powder-coated

      Baffle

      adjustable front and sides

      Gear Box

      enclosed

      Gear Material

      metal-alloy

      Impeller

      designed for even spread pattern

      Axel Material

      metal-alloy

      Grate

      yes

      Gate Control

      lever

      Linkage

      solid steel

      Agitator Type

      auger

      Wheel Size (inches)

      12

      Wheel Type

      pneumatic

      Rain Cover

      yes

      Item Dimensions (L x W x H – inches)

      38 x 24 x 36

      Item Weight (pounds)

      38.5

      Warranty

      5-year limited

      Due to our ongoing product improvement process, product specifications may change without notice.