Chapin 8401C: 80-pound Professional Broadcast Turf Spreader

#8401C

PrintWarning: Cancer and Reproductive Harm.

Print Advertencia: Cáncer y Daños Reproductivos.

PrintAvertissement: Cancer et Dommages Reproductifs.

Print www.P65Warnings.ca.gov.


Chapin's 8401C 80-pound capacity professional turf spreader provides superior performance. With its 1-piece red poly hopper and molded finger grips, rubber-gripped T-handle, and stainless-steel frame, you’ll be using this spreader season-after-season. The adjustable gate control lever accommodates a variety of seeds and fertilizers, and a cast zinc-plated agitator helps prevent clumping. Directional spread pattern control ensures the material is applied where it is needed. 14-inch pneumatic tires keep it steady on grass and hills. A rain cover and hopper grate are included. Made in the USA with global materials and backed by Chapin’s limited-lifetime warranty.

  • 80-pound capacity hopper: weather and rust-resistant, red, 1-piece poly is supported on a stainless-steel frame; enclosed gearbox products it from weather and a grease fitting minimizes friction; rain cover and hopper grate are included
  • Made in the USA with global materials: designed and produced in the USA with US-based customer service and technical support, located at Chapin’s home base in Batavia, NY; backed by Chapin’s limited-lifetime warranty
  • Rubber gripped t-shaped handles: large handles to easily push the spreader over grass and uneven ground
  • Spread pattern control: adjustable gate lever and stainless-steel gate linkage allows you to spread a range of products throughout the seasons; use your preferred brand of fertilizer, seed, weed control and pest control particles
  • 14-inch pneumatic tires: designed to handle uneven ground, acreage, and lawns
  • Note: assembly is required; not recommended for use with rock salt products, sand or sand mixes, pelletized lime, lime or lime powders

    Applications: fertilizing, seeding, weed control

    Documents & Support

    Chapin 8401C Professional Turf Spreader Product Manual
    Chapin Warranty Information
    Turf Spreader Technical Support Videos

    Questions on chemical compatibility? Contact Tech Support! (Online Form)

    IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING.

    Replacement Parts

    Ref. # Qty Part No. Description
    1 1 6-9140 Gearbox assembly
    2 1 6-9009 Driveshaft with 2 bearings
    3 1 6-9060 Gate control assembly
    4 1 6-9061 Impeller
    5 1 6-9015 Wheels with hardware
    6 1 6-9062 Handle grips
    7 1 6-9086-1 Hardware blister kit
    8 1 6-9151 Hardware blister kit
    9 1 6-9070 Grate
    10 1 6-9000 Rain cover
    11 1 6-9125 Auger
    12 1 6-9069 Rear baffle

    Not all parts are available for purchase on our website. Please call Customer Service to order parts if you don't see your part listed. 1-800-444-3140

    Chapin 8401C Replacement Parts

    Technical Specs

    Model Number

    8401C

    Hopper Material

    poly

    Hopper Capacity (pounds)

    80

    Frame Material

    stainless steel

    Handle Type

    t-handle with rubber grips

    Handle Material

    stainless steel

    Baffle

    spread pattern control

    Gear Box

    enclosed with grease fitting

    Gear Material

    metal-alloy

    Impeller

    designed for even spread pattern

    Axel Material

    metal-alloy

    Grate

    yes

    Gate Control

    lever

    Linkage

    solid steel

    Agitator Type

    cast zinc-plated

    Wheel Size (inches)

    14

    Wheel Type

    pneumatic

    Rain Cover

    yes

    Item Dimensions (L x W x H – inches)

    24.5 x 18.875 x 14.375  (unassembled)

    Item Weight (pounds)

    36.5

    Warranty

    5-year limited

    Due to our ongoing product improvement process, product specifications may change without notice.

    Chapin's 8401C 80-pound capacity professional turf spreader provides superior performance. With its 1-piece red poly hopper and molded finger grips, rubber-gripped T-handle, and stainless-steel frame, you’ll be using this spreader season-after-season. The adjustable gate control lever accommodates a variety of seeds and fertilizers, and a cast zinc-plated agitator helps prevent clumping. Directional spread pattern control ensures the material is applied where it is needed. 14-inch pneumatic tires keep it steady on grass and hills. A rain cover and hopper grate are included. Made in the USA with global materials and backed by Chapin’s limited-lifetime warranty.

    • 80-pound capacity hopper: weather and rust-resistant, red, 1-piece poly is supported on a stainless-steel frame; enclosed gearbox products it from weather and a grease fitting minimizes friction; rain cover and hopper grate are included
    • Made in the USA with global materials: designed and produced in the USA with US-based customer service and technical support, located at Chapin’s home base in Batavia, NY; backed by Chapin’s limited-lifetime warranty
    • Rubber gripped t-shaped handles: large handles to easily push the spreader over grass and uneven ground
    • Spread pattern control: adjustable gate lever and stainless-steel gate linkage allows you to spread a range of products throughout the seasons; use your preferred brand of fertilizer, seed, weed control and pest control particles
    • 14-inch pneumatic tires: designed to handle uneven ground, acreage, and lawns
    • Note: assembly is required; not recommended for use with rock salt products, sand or sand mixes, pelletized lime, lime or lime powders

      Applications: fertilizing, seeding, weed control

      Documents & Support

      Chapin 8401C Professional Turf Spreader Product Manual
      Chapin Warranty Information
      Turf Spreader Technical Support Videos

      Questions on chemical compatibility? Contact Tech Support! (Online Form)

      IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING.

      Replacement Parts

      Ref. # Qty Part No. Description
      1 1 6-9140 Gearbox assembly
      2 1 6-9009 Driveshaft with 2 bearings
      3 1 6-9060 Gate control assembly
      4 1 6-9061 Impeller
      5 1 6-9015 Wheels with hardware
      6 1 6-9062 Handle grips
      7 1 6-9086-1 Hardware blister kit
      8 1 6-9151 Hardware blister kit
      9 1 6-9070 Grate
      10 1 6-9000 Rain cover
      11 1 6-9125 Auger
      12 1 6-9069 Rear baffle

      Not all parts are available for purchase on our website. Please call Customer Service to order parts if you don't see your part listed. 1-800-444-3140

      Chapin 8401C Replacement Parts

      Technical Specs

      Model Number

      8401C

      Hopper Material

      poly

      Hopper Capacity (pounds)

      80

      Frame Material

      stainless steel

      Handle Type

      t-handle with rubber grips

      Handle Material

      stainless steel

      Baffle

      spread pattern control

      Gear Box

      enclosed with grease fitting

      Gear Material

      metal-alloy

      Impeller

      designed for even spread pattern

      Axel Material

      metal-alloy

      Grate

      yes

      Gate Control

      lever

      Linkage

      solid steel

      Agitator Type

      cast zinc-plated

      Wheel Size (inches)

      14

      Wheel Type

      pneumatic

      Rain Cover

      yes

      Item Dimensions (L x W x H – inches)

      24.5 x 18.875 x 14.375  (unassembled)

      Item Weight (pounds)

      36.5

      Warranty

      5-year limited

      Due to our ongoing product improvement process, product specifications may change without notice.