Chapin 82104B: 80-pound Poly Hopper Professional & Contractor Salt & Ice Melt Broadcast Spreader
#82104B
The product is out of stock
Warning: Cancer and Reproductive Harm.
Advertencia: Cáncer y Daños Reproductivos.
Avertissement: Cancer et Dommages Reproductifs.
Chapin’s 82104B professional salt spreader is designed and built as a professional, contractor spreader to spread ice melt and salt along sidewalks and professional buildings and is simple enough for a homeowner to use as a salt spreader for their driveway. Our professional salt spreader includes a spiked auger to tear up clumps of salt or ice melt to not clog while spreading. Its rubber grips on the t-shaped stainless steel handle make it easier to push along uneven surfaces, especially while wearing gloves. The 82104B professional salt spread comes with a fixed rear and adjustable side baffles to control where you’re spreading and an adjustable gate to control the amount you’re spreading. A rain cover and grate is included. This unit is not recommended for use with rock salt, sand, or sand mixes. Made in the USA with global materials and backed by Chapin’s 5-year limited warranty.
- 80-pound capacity hopper: rust-resistant, blue poly holds up to 80 pounds of material and is supported on stainless steel frame; enclosed gears are protected from the weather
- Made in the USA with global materials: designed and produced in the USA with US-based customer service and technical support, located at Chapin’s home base in Batavia, NY; backed by Chapin’s 5-year limited warranty
- T-shaped with rubber grips: large handle to easily push the spreader through snow and over ice; comfortable to grip with gloves; some assembly required
- Rear and side baffles: target where the ice melt should go by setting the side baffles; better direction and less wasted product; the fixed rear baffle keeps particles from spraying backwards towards you while spreading
- Spiked auger: breaks up clumps so your preferred salt or ice melt can easily flows through the gate opening
- Gate lever: change the gate opening based on the particulates; recommended for use with salt, halite, potassium chloride, magnesium chloride and calcium chloride (small and pelletized particulates)
- Tires and accessories: 12-inch pneumatic, wide-tread tires move over uneven ground; rain/snow cover included to protect particulates while spreading
- Note: not recommended for use with rock salt products, sand or sand mixes, pelletized lime, lime or lime powders
Applications: pretreat and de-ice solutions
Documents & Support
| Chapin 82104B Professional Salt & Ice Melt Spreader Product Manual |
| Chapin Warranty Information |
| Salt Spreader Technical Support Videos |
| IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING. |
Questions on chemical compatibility? Contact Tech Support! (Online Form) |
Technical Specs
Model Number |
82104B |
Hopper Material |
poly |
Hopper Capacity (pounds) |
80 |
Frame Material |
stainless steel |
Handle Type |
t-handle with rubber grips |
Handle Material |
stainless steel |
Baffle |
fixed rear and adjustable sides |
Gear Box |
enclosed |
Gear Material |
metal-alloy |
Impeller |
designed for even spread pattern |
Axel Material |
metal-alloy |
Grate |
yes |
Gate Control |
adjustable lever |
Linkage |
stainless steel |
Agitator Type |
spiked auger |
Wheel Size (inches) |
12 |
Wheel Type |
pneumatic |
Rain Cover |
yes |
Item Weight (pounds) |
38.5 |
Due to our ongoing product improvement process, product specifications may change without notice.
Chapin’s 82104B professional salt spreader is designed and built as a professional, contractor spreader to spread ice melt and salt along sidewalks and professional buildings and is simple enough for a homeowner to use as a salt spreader for their driveway. Our professional salt spreader includes a spiked auger to tear up clumps of salt or ice melt to not clog while spreading. Its rubber grips on the t-shaped stainless steel handle make it easier to push along uneven surfaces, especially while wearing gloves. The 82104B professional salt spread comes with a fixed rear and adjustable side baffles to control where you’re spreading and an adjustable gate to control the amount you’re spreading. A rain cover and grate is included. This unit is not recommended for use with rock salt, sand, or sand mixes. Made in the USA with global materials and backed by Chapin’s 5-year limited warranty.
- 80-pound capacity hopper: rust-resistant, blue poly holds up to 80 pounds of material and is supported on stainless steel frame; enclosed gears are protected from the weather
- Made in the USA with global materials: designed and produced in the USA with US-based customer service and technical support, located at Chapin’s home base in Batavia, NY; backed by Chapin’s 5-year limited warranty
- T-shaped with rubber grips: large handle to easily push the spreader through snow and over ice; comfortable to grip with gloves; some assembly required
- Rear and side baffles: target where the ice melt should go by setting the side baffles; better direction and less wasted product; the fixed rear baffle keeps particles from spraying backwards towards you while spreading
- Spiked auger: breaks up clumps so your preferred salt or ice melt can easily flows through the gate opening
- Gate lever: change the gate opening based on the particulates; recommended for use with salt, halite, potassium chloride, magnesium chloride and calcium chloride (small and pelletized particulates)
- Tires and accessories: 12-inch pneumatic, wide-tread tires move over uneven ground; rain/snow cover included to protect particulates while spreading
- Note: not recommended for use with rock salt products, sand or sand mixes, pelletized lime, lime or lime powders
Applications: pretreat and de-ice solutions
Documents & Support
| Chapin 82104B Professional Salt & Ice Melt Spreader Product Manual |
| Chapin Warranty Information |
| Salt Spreader Technical Support Videos |
| IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING. |
Questions on chemical compatibility? Contact Tech Support! (Online Form) |
Technical Specs
Model Number |
82104B |
Hopper Material |
poly |
Hopper Capacity (pounds) |
80 |
Frame Material |
stainless steel |
Handle Type |
t-handle with rubber grips |
Handle Material |
stainless steel |
Baffle |
fixed rear and adjustable sides |
Gear Box |
enclosed |
Gear Material |
metal-alloy |
Impeller |
designed for even spread pattern |
Axel Material |
metal-alloy |
Grate |
yes |
Gate Control |
adjustable lever |
Linkage |
stainless steel |
Agitator Type |
spiked auger |
Wheel Size (inches) |
12 |
Wheel Type |
pneumatic |
Rain Cover |
yes |
Item Weight (pounds) |
38.5 |
Due to our ongoing product improvement process, product specifications may change without notice.
